-40%
External 5.25" SCSI Case Enclosure 50-pin SCSI-1 Centronics CN-50 SCSI-2 3.5"
$ 21.09
- Description
- Size Guide
Description
External SCSI Enclosure with Centronics-style ConnectorsJMR Electronics PN MZLO-001
One internal 0.1" 50-pin Berg-pin style SCSI connector
Two External CN-50 Centronics style SCSI Connectors
Houses a 3-1/2" or 5-1/4" hard disk drive, optical drive, tape drive, etc
Open front bezel for an optical or tape drive
IEC AC power input connector
Two 120V AC Power Outlets
SCSI ID switch (see notes*)
Fan (see notes*)
Metal base and cover
Plastic front bezel
Beige color
The base contains bosses for both 5-1/4" and 3-1/2" drives. It could be used for a 3-1/2" SCSI-1 or SCSI-2 Hard Drive with 50-Pin 0.1" two-row IDC connectors, but the front bezel would remain open since a blocking plate is not included. Since the opening is standard, you may be able to adapt a blocking plate from a computer case.
* Notes
The fan works, but is a little noisy and may need replaced at some point, but it ran throughout my testing. The SCSI ID connector is 4 separate connectors that plug into the pin field on the drive (refer to the 11th photo). At one point I may have decoded which bit was which and put a sticky note on the bottom. That note will be included, but you may need to experiment and refer to your drive's documentation to properly orient these connectors on your drive.
Shipped with USPS Priority Mail or potentially more economical Parcel Select ground service. I use the eBay shipping calculator to quote your shipping based on weight and your shipping address. Your order will ship at the 6 lb rate from zip code 60102.